Category: Twitter

“New shoes” by “Morgaine” from Flickr

Making Windows Cloud-Init Scripts run after a reboot (Using Terraform)

JonTheNiceGuy Leave a comment

I’m currently building a Proof Of Value (POV) environment for a product, and one of the things I needed in my environment was an Active Directory domain.

To do this in AWS, I had to do the following steps:

  1. Build my Domain Controller
    1. Install Windows
    2. Set the hostname (Reboot)
    3. Promote the machine to being a Domain Controller (Reboot)
    4. Create a domain user
  2. Build my Member Server
    1. Install Windows
    2. Set the hostname (Reboot)
    3. Set the DNS client to point to the Domain Controller
    4. Join the server to the domain (Reboot)

To make this work, I had to find a way to trigger build steps after each reboot. I was working with Windows 2012R2, Windows 2016 and Windows 2019, so the solution had to be cross-version. Fortunately I found this script online! That version was great for Windows 2012R2, but didn’t cover Windows 2016 or later… So let’s break down what I’ve done!

In your userdata field, you need to have two sets of XML strings, as follows:

<persist>true</persist>
<powershell>
$some = "powershell code"
</powershell>

The first block says to Windows 2016+ “keep trying to run this script on each boot” (note that you need to stop it from doing non-relevant stuff on each boot – we’ll get to that in a second!), and the second bit is the PowerShell commands you want it to run. The rest of this now will focus just on the PowerShell block.

  $path= 'HKLM:\Software\UserData'
  
  if(!(Get-Item $Path -ErrorAction SilentlyContinue)) {
    New-Item $Path
    New-ItemProperty -Path $Path -Name RunCount -Value 0 -PropertyType dword
  }
  
  $runCount = Get-ItemProperty -Path $path -Name Runcount -ErrorAction SilentlyContinue | Select-Object -ExpandProperty RunCount
  
  if($runCount -ge 0) {
    switch($runCount) {
      0 {
        $runCount = 1 + [int]$runCount
        Set-ItemProperty -Path $Path -Name RunCount -Value $runCount
        if ($ver -match 2012) {
          #Enable user data
          $EC2SettingsFile = "$env:ProgramFiles\Amazon\Ec2ConfigService\Settings\Config.xml"
          $xml = [xml](Get-Content $EC2SettingsFile)
          $xmlElement = $xml.get_DocumentElement()
          $xmlElementToModify = $xmlElement.Plugins
          
          foreach ($element in $xmlElementToModify.Plugin)
          {
            if ($element.name -eq "Ec2HandleUserData") {
              $element.State="Enabled"
            }
          }
          $xml.Save($EC2SettingsFile)
        }
        $some = "PowerShell Script"
      }
    }
  }

Whew, what a block! Well, again, we can split this up into a couple of bits.

In the first few lines, we build a pointer, a note which says “We got up to here on our previous boots”. We then read that into a variable and find that number and execute any steps in the block with that number. That’s this block:

  $path= 'HKLM:\Software\UserData'
  
  if(!(Get-Item $Path -ErrorAction SilentlyContinue)) {
    New-Item $Path
    New-ItemProperty -Path $Path -Name RunCount -Value 0 -PropertyType dword
  }
  
  $runCount = Get-ItemProperty -Path $path -Name Runcount -ErrorAction SilentlyContinue | Select-Object -ExpandProperty RunCount
  
  if($runCount -ge 0) {
    switch($runCount) {

    }
  }

The next part (and you’ll repeat it for each “number” of reboot steps you need to perform) says “increment the number” then “If this is Windows 2012, remind the userdata handler that the script needs to be run again next boot”. That’s this block:

      0 {
        $runCount = 1 + [int]$runCount
        Set-ItemProperty -Path $Path -Name RunCount -Value $runCount
        if ($ver -match 2012) {
          #Enable user data
          $EC2SettingsFile = "$env:ProgramFiles\Amazon\Ec2ConfigService\Settings\Config.xml"
          $xml = [xml](Get-Content $EC2SettingsFile)
          $xmlElement = $xml.get_DocumentElement()
          $xmlElementToModify = $xmlElement.Plugins
          
          foreach ($element in $xmlElementToModify.Plugin)
          {
            if ($element.name -eq "Ec2HandleUserData") {
              $element.State="Enabled"
            }
          }
          $xml.Save($EC2SettingsFile)
        }
        
      }

In fact, it’s fair to say that in my userdata script, this looks like this:

  $path= 'HKLM:\Software\UserData'
  
  if(!(Get-Item $Path -ErrorAction SilentlyContinue)) {
    New-Item $Path
    New-ItemProperty -Path $Path -Name RunCount -Value 0 -PropertyType dword
  }
  
  $runCount = Get-ItemProperty -Path $path -Name Runcount -ErrorAction SilentlyContinue | Select-Object -ExpandProperty RunCount
  
  if($runCount -ge 0) {
    switch($runCount) {
      0 {
        ${file("templates/step.tmpl")}

        ${templatefile(
          "templates/rename_windows.tmpl",
          {
            hostname = "SomeMachine"
          }
        )}
      }
      1 {
        ${file("templates/step.tmpl")}

        ${templatefile(
          "templates/join_ad.tmpl",
          {
            dns_ipv4 = "192.0.2.1",
            domain_suffix = "ad.mycorp",
            join_account = "ad\someuser",
            join_password = "SomePassw0rd!"
          }
        )}
      }
    }
  }

Then, after each reboot, you need a new block. I have a block to change the computer name, a block to join the machine to the domain, and a block to install an software that I need.

Featured image is “New shoes” by “Morgaine” on Flickr and is released under a CC-BY-SA license.

"Root" by "llee_wu" on Flickr

A quick note on using Firefox in Windows in a Corporate or Enterprise environment

JonTheNiceGuy Leave a comment

I’ve been using Firefox as my “browser of choice” for around 15 years. I tend to prefer to use it for all sorts of reasons, but the main thing I expect is support for extensions. Not many of them, but … well, there’s a few!

There are two stumbling blocks for using Firefox in a corporate or enterprise setting. These are:

  1. NTLM or Kerberos Authentication for resources like Sharepoint and ADFS.
  2. Enterprise TLS certificates (usually deployed via GPO as part of the domain)

These are both trivially fixed in the about:config screen, but first you need to get past a scary looking warning page!

In the address bar, where it probably currently says jon.sprig.gs, click in there and type about:config.

Getting to about:config

This brings you to a scary page!

Proceed with caution! (of course!!)

Click the “Accept the Risk and Continue” (note, this is with Firefox 76. Wording with later or earlier versions may differ).

As if it wasn’t obvious enough from the previous screen, this “may impact performance and security”…

And then you get a search box.

In the “Search preference name” type in ntlm and find the line that says network.automatic-ntlm-auth.trusted-uris.

The “NTLM Options page”

Type in there the suffixes of any TRUSTED domains. For example, if your company uses the domain names of bigcompany.com, bigco.local and big.company then you’d type in:

bigcompany.com,bigco.local,big.company

Any pages that you browse to, where they request NTLM authentication, will receive an NTLM set of credentials if prompted (same as IE, Edge, and Chrome already do!) NTLM is effectively a way to pass a trusted Kerberos ticket (a bit like your domain credentials) into a web page.

Next up, let’s get those pesky certificate errors removed!

This assumes that you have a centrally managed TLS Root Certificate, and the admins in your network haven’t just been dumping self signed certificates everywhere (nothing gets around that… just sayin’).

Still in about:config, clear the search box and type enterprise, like this!

Enterprise Roots are here!

Find the line security.enterprise_roots.enabled and make sure it says true. If it doesn’t double click it, so it does.

Now you can close your preferences page, and you should be fine to visit your internal source code repository, time sheeting system or sharepoint site, with almost no interruptions!

If you’ve been tasked for turning this stuff on in your estate of managed desktop environment machines, then you might find this article (on Autoconfiguration of Firefox) of use (but I’ve not tried it!)

Featured image is “Root” by “llee_wu” on Flickr and is released under a CC-BY-ND license.

"Debian" by "medithIT" on Flickr

One to read: Installing #Debian on #QNAP TS-219P

JonTheNiceGuy Leave a comment

A couple of years ago, a very lovely co-worked gave me his QNAP TS-219P which he no longer required. I’ve had it sitting around storing data, but not making the most use of it since he gave it to me.

After a bit of tinkering in my home network, I decided that I needed a more up-to-date OS on this device, so I found this page that tells you how to install Debian Buster. This will wipe the device, so make sure you’ve got a full backup of your content!

https://www.cyrius.com/debian/kirkwood/qnap/ts-219/install/

Essentially, you backup the existing firmware with these commands:

cat /dev/mtdblock0 > mtd0
cat /dev/mtdblock1 > mtd1
cat /dev/mtdblock2 > mtd2
cat /dev/mtdblock3 > mtd3
cat /dev/mtdblock4 > mtd4
cat /dev/mtdblock5 > mtd5

These files need to be transferred off, in “case of emergency”, then download the installation files:

mkdir /tmp/debian
cd /tmp/debian
busybox wget http://ftp.debian.org/debian/dists/buster/main/installer-armel/current/images/kirkwood/network-console/qnap/ts-21x/{initrd,kernel-6281,kernel-6282,flash-debian,model}
sh flash-debian
reboot

The flash-debian command takes around 3-5 minutes, apparently, although I did start the job and walk away, so it might have taken anywhere up to 30 minutes!

Then, SSH to the IP of the device, and use the credentials installer and install as username and password.

Complete the installation steps in the SSH session, then let it reboot.

Be aware that the device is likely to have at least one swap volume it will try to load, so it might be worth opening a shell and running the command “swapoff -a” before removing the swap partitions. It’s also worth removing all the partitions and then rebooting and starting again if you have any problems with the partitioning.

When it comes back, you have a base installation of Debian, which doesn’t have sudo installed, so use su - and put in the root password.

Good luck!

Screencast 005: SSH Keys and Client Configuration (a Mentoring style video)

JonTheNiceGuy 2 Comments

I’m back again with another Mentoring Style video, in which I talk about how to create and use SSH keys (although, in hindsight, not using PuTTY which I probably should have covered!) and how to use SSH Config Files to make your life easier.

Screencast 005: SSH Keys and Client Configuration

Also available on Archive.org and LBRY.

Much of the SSH config I created here was based on files I’ve uploaded to Github already.

Opening to my video: Screencast 004 - Gitlab and Ansible Tower (AWX)

Screencast 004: Gitlab and Ansible Tower / AWX

JonTheNiceGuy Leave a comment

Another new mentoring style video is up, this time talking about how to start using Ansible Tower (or AWX), starting from a repository on Gitlab.

Screencast 004: Gitlab and Ansible Tower (AWX)

Also available on Archive.org and LBRY.

The Terraform, Ansible and Cloud-init scripts used to create the basis of this video are here: https://github.com/JonTheNiceGuy/redesigned-tribble/

Opening to my video: Screencast 003 - Gitlab

Screencast 003: Gitlab

JonTheNiceGuy Leave a comment

I’ve done a new mentoring style video, talking about how to use a self-hosted version of Gitlab for basic group projects and individual projects.

Screencast 003: Gitlab

Also available on Archive.org and LBRY.

Late edit 2020-03-25: To build the Gitlab environment I created, take a look at this git repository, which uses Terraform, some cloud init scripts and an ansible playbook. In particular, look at the following files:

If you just want to build the Gitlab environment, then it’s worth removing or renaming (to anything that isn’t .tf – I use .tf_unload) the files load_aws_module.tf, load_awx_module.tf, load_azure_module.tf

Opening to my video: Screencast 002 - A quick walk through Git

Screencast 002: A quick walk through Git (a mentoring style video)

JonTheNiceGuy Leave a comment

I have done a follow-up Mentoring style video to support my last one. This video shows how to fix some of the issues in Git I came across in my last mentoring video!

Screencast 002: A quick walk through Git

I took some advice from a colleague who noticed that I skipped past a couple of issues with my Git setup, so I re-did them :) I hope this makes sense, and at 35 minutes, is a bit more understandable than the last 1h15 video!

Also on LBRY and Archive.org

Opening to my video: Screencast 001 - Ansible and Inspec using Vagrant

Screencast 001: Ansible and Inspec with Vagrant and Git (a mentoring style video)

JonTheNiceGuy Leave a comment

If you’ve ever wondered how I use Ansible and Inspec, or wondered why some of my Vagrant files look like they do, well, I want to start recording some “mentor” style videos… You know how, if you were sitting next to someone who’s a mentor to you, and you watch how they build a solution.

The first one was released last night!

I recently saw a video by Chris Hartjes on how he creates his TDD (Test driven development) based PHP projects, and I really wanted to emulate that style, but talking about the things I use.

This was my second attempt at recording a mentoring style video yesterday, the first was shown to the Admin Admin Podcast listeners group on Telegram, and then sacrificed to the demo gods (there were lots of issues in that first video) never to be seen again.

From a tooling perspective, I’m using a remote virtual machine running Ubuntu Mate 18.04 over RDP (to improve performance) with xrdp and Remmina, OBS is running locally to record the content, and I’m using Visual Studio Code, git, Vagrant and Virtualbox, as well as Ansible and Inspec.

Late edit 2020-02-29: Like videos like this, hate YouTube? It’s also on archive.org: https://archive.org/details/JonTheNiceGuyScreencast001

Late edit 2020-03-01: Popey told me about LBRY.tv when I announced this on the Admin Admin Podcast telegram channel, and so I’ve also copied the video to there: https://lbry.tv/@JonTheNiceGuy:b/Screencast001-Ansible-and-Inspec-with-Vagrant:8

"vieux port Marseille" by "Jeanne Menjoulet" on Flickr

Networking tricks with Multipass in Virtualbox on Windows (Bridged interfaces and Port Forwards)

JonTheNiceGuy 15 Comments

TL;DR? Want to “just” bridge one or more interfaces to a Multipass instance when you’re using Virtualbox? See the Bridging Summary below. Want to do a port forward? See the Port Forward section below. You will need the psexec command and to execute this as an administrator. The use of these two may be considered a security incident on your computing environment, depending on how your security processes and infrastructure are defined and configured.

Ah Multipass. This is a tool created by Canonical to create a “A mini-cloud on your Mac or Windows workstation.” (from their website)…

I’ve often seen this endorsed as the tool of choice from Canonical employees to do “stuff” like run Kubernetes, develop tools for UBPorts (previously Ubuntu Touch) devices, and so on.

So far, it seems interesting. It’s a little bit like Vagrant with an in-built cloud-init Provisioner, and as I want to test out the cloud-init files I’m creating for AWS and Azure, that’d be so much easier than actually building the AWS or Azure machines, or finding a viable cloud-init plugin for Vagrant to test it out.

BUT… Multipass is really designed for Linux systems (running LibVirt), OS X (running HyperKit) and Windows (running Hyper-V). Even if I were using Windows 10 Pro on this machine, I use Virtualbox for “things” on my Windows Machine, and Hyper-V steals the VT-X bit, which means that VirtualBox can’t run x64 code…. Soooo I can’t use the Hyper-V mode.

Now, there is a “fix” for this. You can put Multipass into Virtualbox mode, which lets you run Multipass on Windows or OS X without using their designed-for hypervisor, but this has a downside, you see, VirtualBox doesn’t give MultiPass the same interface to route networking connections to the VM, and there’s currently no CLI or GUI options to say “bridge my network” or “forward a port” (in part because it needs to be portable to the native hypervisor options, apparently). So, I needed to fudge some things so I can get my beloved bridged connections.

I got to the point where I could do this, thanks to the responses to a few issues I raised on the Multipass Github issues, mostly #1333.

The first thing you need to install in Windows is PsExec, because Multipass runs it’s Virtual Machines as the SYSTEM account, and talking to SYSTEM account processes is nominally hard. Get PsExec from the SysInternals website. Some IT Security professionals will note the addition of PsExec as a potential security incident, but then again, they might also see the running of a virtual machine as a security incident too, as these aren’t controlled with a central image. Anyway… Just bear it in mind, and don’t shout at me if you get frogmarched in front of your CISO.

I’m guessing if you’re here, you’ve already installed Multipass, (but if not, and it seems interesting – it’s over at https://multipass.run. Get it and install it, then carry on…) and you’ve probably enabled the VirtualBox mode (if not – open a command prompt as administrator, and run “multipass set local.driver=virtualbox“). Now, you can start sorting out your bridges.

Sorting out bridges

First things first, you need to launch a virtual machine. I did, and it generated a name for my image.

C:\Users\JON>multipass launch
Launched: witty-kelpie

Fab! We have a running virtual machine, and you should be able to get a shell in there by running multipass shell "witty-kelpie" (the name of the machine it launched before). But, uh-oh. We have the “default” NAT interface of this device mapped, not a bridged interface.

C:\Users\JON>multipass shell "witty-kelpie"
Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.15.0-76-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Thu Feb  6 10:56:38 GMT 2020

  System load:  0.3               Processes:             82
  Usage of /:   20.9% of 4.67GB   Users logged in:       0
  Memory usage: 11%               IP address for enp0s3: 10.0.2.15
  Swap usage:   0%


0 packages can be updated.
0 updates are security updates.


To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@witty-kelpie:~$

So, exit the machine, and issue a multipass stop "witty-kelpie" command to ask Virtualbox to shut it down.

So, this is where the fun[1] part begins.
[1] The “Fun” part here depends on how you view this specific set of circumstances 😉

We need to get the descriptions of all the interfaces we might want to bridge to this device. I have three interfaces on my machine – a WiFi interface, a Ethernet interface on my laptop, and an Ethernet interface on my USB3 dock. At some point in the past, I renamed these interfaces, so I’d recognise them in the list of interfaces, so they’re not just called “Connection #1”, “Connection #2” and so on… but you should recognise your interfaces.

To get this list of interfaces, open PowerShell (as a “user”), and run this command:

PS C:\Users\JON> Get-NetAdapter -Physical | format-list -property "Name","DriverDescription"

Name              : On-Board Network Connection
DriverDescription : Intel(R) Ethernet Connection I219-LM

Name              : Wi-Fi
DriverDescription : Intel(R) Dual Band Wireless-AC 8260

Name              : Dock Network Connection
DriverDescription : DisplayLink Network Adapter NCM

For reasons best known to the Oracle team, they use the “Driver Description” to identify the interfaces, not the name assigned to the device by the user, so, before we get started, find your interface, and note down the description for later. If you want to bridge “all” of them, make a note of all the interfaces in question, and in the order you want to attach them. Note that Virtualbox doesn’t really like exposing more than 8 NICs without changing the Chipset to ICH9 (but really… 9+ NICs? really??) and the first one is already consumed with the NAT interface you’re using to connect to it… so that gives you 7 bridgeable interfaces. Whee!

So, now you know what interfaces you want to bridge, let’s configure the Virtualbox side. Like I said before you need psexec. I’ve got psexec stored in my Downloads folder. You can only run psexec as administrator, so open up an Administrator command prompt or powershell session, and run your command.

Just for clarity, your commands are likely to have some different paths, so remember that wherever “your” PsExec64.exe command is located, mine is in C:\Users\JON\Downloads\sysinternals\PsExec64.exe, and wherever your vboxmanage.exe is located, mine is in C:\Program Files\Oracle\VirtualBox\vboxmanage.exe.

Here, I’m going to attach my dock port (“DisplayLink Network Adapter NCM”) to the second VirtualBox interface, the Wifi adaptor to the third interface and my locally connected interface to the fourth interface. Your interfaces WILL have different descriptions, and you’re likely not to need quite so many of them!

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" modifyvm "witty-kelpie" --nic2 bridged --bridgeadapter2 "DisplayLink Network Adapter NCM" --nic3 bridged --bridgeadapter3 "Intel(R) Dual Band Wireless-AC 8260" --nic4 bridged --bridgeadapter4 "Intel(R) Ethernet Connection I219-LM"

PsExec v2.2 - Execute processes remotely
Copyright (C) 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com

c:\program files\oracle\virtualbox\vboxmanage exited on MINILITH with error code 0.

An error code of 0 means that it completed successfuly and with no issues.

If you wanted to use a “Host Only” network (if you’re used to using Vagrant, you might know it as “Private” Networking), then change the NIC you’re interested in from --nicX bridged --bridgeadapterX "Some Description" to --nicX hostonly --hostonlyadapterX "VirtualBox Host-Only Ethernet Adapter" (where X is replaced with the NIC number you want to swap, ranged between 2 and 8, as 1 is the NAT interface you use to SSH into the virtual machine.)

Now we need to check to make sure the machine has it’s requisite number of interfaces. We use the showvminfo flag to the vboxmanage command. It produces a LOT of content, so I’ve manually filtered the lines I want, but you should spot it reasonably quickly.

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" showvminfo "witty-kelpie"

PsExec v2.2 - Execute processes remotely
Copyright (C) 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com


Name:                        witty-kelpie
Groups:                      /Multipass
Guest OS:                    Ubuntu (64-bit)
<SNIP SOME CONTENT>
NIC 1:                       MAC: 0800273CCED0, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings:  MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 1 Rule(0):   name = ssh, protocol = tcp, host ip = , host port = 53507, guest ip = , guest port = 22
NIC 2:                       MAC: 080027303758, Attachment: Bridged Interface 'DisplayLink Network Adapter NCM', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 3:                       MAC: 0800276EA174, Attachment: Bridged Interface 'Intel(R) Dual Band Wireless-AC 8260', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 4:                       MAC: 080027042135, Attachment: Bridged Interface 'Intel(R) Ethernet Connection I219-LM', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 5:                       disabled
NIC 6:                       disabled
NIC 7:                       disabled
NIC 8:                       disabled
<SNIP SOME CONTENT>

Configured memory balloon size: 0MB

c:\program files\oracle\virtualbox\vboxmanage exited on MINILITH with error code 0.

Fab! We now have working interfaces… But wait, let’s start that VM back up and see what happens.

C:\Users\JON>multipass shell "witty-kelpie"
Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.15.0-76-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Thu Feb  6 11:31:08 GMT 2020

  System load:  0.1               Processes:             84
  Usage of /:   21.1% of 4.67GB   Users logged in:       0
  Memory usage: 11%               IP address for enp0s3: 10.0.2.15
  Swap usage:   0%


0 packages can be updated.
0 updates are security updates.


Last login: Thu Feb  6 10:56:45 2020 from 10.0.2.2
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@witty-kelpie:~$

Wait, what….. We’ve still only got the one interface up with an IP address… OK, let’s fix this!

As of Ubuntu 18.04, interfaces are managed using Netplan, and, well, when the VM was built, it didn’t know about any interface past the first one, so we need to get Netplan to get them enabled. Let’s check they’re detected by the VM, and see what they’re all called:

ubuntu@witty-kelpie:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 08:00:27:3c:ce:d0 brd ff:ff:ff:ff:ff:ff
3: enp0s8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 08:00:27:30:37:58 brd ff:ff:ff:ff:ff:ff
4: enp0s9: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 08:00:27:6e:a1:74 brd ff:ff:ff:ff:ff:ff
5: enp0s10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 08:00:27:04:21:35 brd ff:ff:ff:ff:ff:ff
ubuntu@witty-kelpie:~$

If you compare the link/ether lines to the output from showvminfo we executed before, you’ll see that the MAC address against enp0s3 matches the NAT interface, while enp0s8 matches the DisplayLink adapter, and so on… So we basically want to ask NetPlan to do a DHCP lookup for all the new interfaces we’ve added to it. If you’ve got 1 NAT and 7 physical interfaces (why oh why…) then you’d have enp0s8, 9, 10, 16, 17, 18 and 19 (I’ll come back to the random numbering in a tic)… so we now need to ask Netplan to do DHCP on all of those interfaces (assuming we’ll be asking for them all to come up!)

If we want to push that in, then we need to add a new file in /etc/netplan called something like 60-extra-interfaces.yaml, that should contain:

network:
  ethernets:
    enp0s8:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 10
    enp0s9:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 11
    enp0s10:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 12
    enp0s16:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 13
    enp0s17:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 14
    enp0s18:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 15
    enp0s19:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 16

Going through this, we basically ask netplan not to assume the interfaces are attached. This stops the boot process for waiting for a timeout to configure each of the interfaces before proceeding, so it means your boot should be reasonably fast, particularly if you don’t always attach a network cable or join a Wifi network on all your interfaces!

We also say to assume we want IPv4 DHCP on each of those interfaces. I’ve done IPv4 only, as most people don’t use IPv6 at home, but if you are doing IPv6 as well, then you’d also need the same lines that start dhcp4 copied to show dhcp6 (like dhcp6: yes and dhcp6-overrides: route-metric: 10)

The eagle eyed of you might notice that the route metric increases for each extra interface. This is because realistically, if you have two interfaces connected (perhaps if you’ve got wifi enabled, and plug a network cable in), then you’re more likely to want to prioritize traffic going over the lower numbered interfaces than the higher number interfaces.

Once you’ve created this file, you need to run netplan apply or reboot your machine.

So, yehr, that gets you sorted on the interface front.

Bridging Summary

To review, you launch your machine with multipass launch, and immediately stop it with multipass stop "vm-name", then, as an admin, run psexec vboxmanage modifyvm "vm-name" --nic2 bridged --bridgedadapter2 "NIC description", and then start the machine with multipass start "vm-name". Lastly, ask the interface to do DHCP by manipulating your Netplan configuration.

Interface Names in VirtualBox

Just a quick note on the fact that the interface names aren’t called things like eth0 any more. A few years back, Ubuntu (amongst pretty much all of the Linux distribution vendors) changed from using eth0 style naming to what they call “Predictable Network Interface Names”. This derives the names from things like, what the BIOS provides for on-board interfaces, slot index numbers for PCI Express ports, and for this case, the “geographic location of the connector”. In Virtualbox, these interfaces are provided as the “Geographically” attached to “port 0” (so enp0 are all on port 0), but for some reason, they broadcast themselves as being attached to the port 0 at “slots” 3, 8, 9, 10, 16, 17, 18 and 19… hence enp0s3 and so on. shrug It just means that if you don’t have the interfaces coming up on the interfaces you’re expecting, you need to run ip link to confirm the MAC addresses match.

Port Forwarding

Unlike with the Bridging, we don’t need to power down the VM to add the extra interfaces, we just need to use psexec (as an admin again) to execute a vboxmanage command – in this case, it’s:

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" controlvm "witty-kelpie" --natpf1 "myport,tcp,,1234,,2345"

OK, that’s a bit more obscure. Basically it says “Create a NAT rule on NIC 1 called ‘myport’ to forward TCP connections from port 1234 attached to any IP associated to the host OS to port 2345 attached to the DHCP supplied IP on the guest OS”.

If we wanted to run a DNS server in our VM, we could run multiple NAT rules in the same command, like this:

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" controlvm "witty-kelpie" --natpf1 "TCP DNS,tcp,127.0.0.1,53,,53" --natpf1 "UDP DNS,udp,127.0.0.1,53,,53"

If we then decide we don’t need those NAT rules any more, we just (with psexec and appropriate paths) issue: vboxmanage controlvm "vm-name" --natpf1 delete "TCP DNS"

Using ifupdown instead of netplan

Late Edit 2020-04-01: On Github, someone asked me how they could use the same type of config with netplan, but instead on a 16.04 system. Ubuntu 16.04 doesn’t use netplan, but instead uses ifupdown instead. Here’s how to configure the file for ifupdown:

You can either add the following stanzas to /etc/network/interfaces, or create a separate file for each interface in /etc/network/interfaces.d/<number>-<interface>.cfg (e.g. /etc/network/interfaces.d/10-enp0s8.cfg)

allow-hotplug enp0s8
iface enp0s8 inet dhcp
  metric 10

To re-iterate, in the above netplan file, the interfaces we identified were: enp0s8, enp0s9, enp0s10, enp0s16, enp0s17, enp0s18 and enp0s19. Each interface was incrementally assigned a route metric, starting at 10 and ending at 16, so enp0s8 has a metric of 10, while enp0s16 has a metric of 13, and so on. To build these files, I’ve created this brief shell script you could use:

export metric=10
for int in 8 9 10 16 17 18 19
do
  echo -e "allow-hotplug enp0s${int}\niface enp0s${int} inet dhcp\n  metric $metric" > /etc/network/interfaces.d/enp0s${int}.cfg
  ((metric++))
done

As before, you could reboot to make the changes to the interfaces. Bear in mind, however, that unlike Netplan, these interfaces will try and DHCP on boot with this configuration, so boot time will take longer if every interface attached isn’t connected to a network.

Using NAT Network instead of NAT Interface

Late update 2020-05-26: Ruzsinsky contacted me by email to ask how I’d use a “NAT Network” instead of a “NAT interface”. Essentially, it’s the same as the Bridged interface above, with one other tweak first, we need to create the Net Network, with this command (as an Admin)

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" natnetwork add --netname MyNet --network 192.0.2.0/24

Next, stop your multipass virtual machine with multipass stop "witty-kelpie", and configure your second interface, like this:

C:\WINDOWS\system32>C:\Users\JON\Downloads\sysinternals\PsExec64.exe -s "c:\program files\oracle\virtualbox\vboxmanage" modifyvm "witty-kelpie" --nic2 natnetwork --nat-network2 "MyNet"

PsExec v2.2 - Execute processes remotely
Copyright (C) 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com

c:\program files\oracle\virtualbox\vboxmanage exited on MINILITH with error code 0.

Start the vm with multipass start "witty-kelpie", open a shell with it multipass shell "witty-kelpie", become root sudo -i and then configure the interface in /etc/netplan/60-extra-interfaces.yaml like we did before:

network:
  ethernets:
    enp0s8:
      optional: yes
      dhcp4: yes
      dhcp4-overrides:
        route-metric: 10

And then run netplan apply or reboot.

What I would say, however, is that the first interface seems to be expected to be a NAT interface, at which point, having a NAT network as well seems a bit pointless. You might be better off using a “Host Only” (or “Private”) network for any inter-host communications between nodes at a network level… But you know your environments and requirements better than I do :)

Featured image is “vieux port Marseille” by “Jeanne Menjoulet” on Flickr and is released under a CC-BY-ND license.

"Unnatural Love" by "Keith Garner" on Flickr

Configuring a Remote Desktop (Gnome Shell) for Ubuntu

JonTheNiceGuy Leave a comment

I started thinking a couple of weeks ago, when my coding laptop broke, that it would be really useful to have a development machine somewhere else that I could use.

It wouldn’t need a lot of power (after all, I’m mostly developing web apps and not compiling stuff), but it does need to be a desktop OS, as I rather like being able to open code editors and suchlike, while I’ve got a web browser open.

I have an Android tablet, which while it’s great for being a tablet, it’s not much use as a desktop, and … yes, I’ve got a work laptop, but I don’t really want to install software on that (and I don’t think my admin team would be happy if I did).

Also, I quite like Linux.

Some time ago, I spotted that AWS has a “Virtual Desktop” environment, and I think that’s kinda what I’m after. Something I can spin up, run for a bit and then shut it down, so I thought I’d build something like that… but not pesky Windows, after all… who likes Windows, eh? ;)

So, I built a Virtual Desktop Environment (VDE) in AWS, using Terraform and a bit of shell script!

I start from an Ubuntu 18.04 server image, and, after the install is complete, I run this user-data script inside it. Yes, I know I could be doing this with Ansible, but… eh, I wanted it to be a quick deployment ;)

Oh, and there’s a couple of Terraform managed variables in here – ${aws_eip.vde.public_ip} is the AWS public IP address assigned to this host., ${var.firstuser} is the username we want to rename “ubuntu” (the stock server username) to. ${var.firstgecos} is the user’s “real name” which the machine identifies the user as (like “Log out Jon Spriggs” and so on). ${var.userpw} is either the password you want it to use, OR (by default) pwgen 12 which generates a 12 character long password. ${var.desktopenv} is the name of the desktop environment I want to install (Ubuntu by default) and … well, ${var.var_start} is a bit of a fudge, because I couldn’t, in a hurry, work out how to tell Terraform not to mangle the bash variable allocation of ${somevar} which is the format that Terraform also uses. D’oh.

#! /bin/bash
#################
# Set Hostname
#################
hostnamectl set-hostname vde.${aws_eip.vde.public_ip}.nip.io
#################
# Change User
#################
user=${var.firstuser}
if [ ! "$user" == 'ubuntu' ]
then
  until usermod -c "${var.firstgecos}" -l $user ubuntu ; do sleep 5 ; done
  until groupmod -n $user ubuntu ; do sleep 5 ; done
  until usermod  -d /home/$user -m $user ; do sleep 5 ; done
  if [ -f /etc/sudoers.d/90-cloudimg-ubuntu ]; then
    mv /etc/sudoers.d/90-cloudimg-ubuntu /etc/sudoers.d/90-cloud-init-users
  fi
  perl -pi -e "s/ubuntu/$user/g;" /etc/sudoers.d/90-cloud-init-users
fi
if [ '${var.userpw}' == '$(pwgen 12)' ]
then 
  apt update && apt install pwgen
fi
newpw="${var.userpw}"
echo "$newpw" > /var/log/userpw
fullpw="$newpw"
fullpw+="\n"
fullpw+="$newpw"
echo -e "$fullpw" | passwd $user
##########################
# Install Desktop and RDP
##########################
apt-get update
export DEBIAN_FRONTEND=noninteractive
apt-get full-upgrade -yq
apt-get autoremove -y
apt-get autoclean -y
apt-get install -y ${var.desktopenv}-desktop xrdp certbot
##########################
# Configure Certbot
##########################
echo "#!/bin/sh" > /etc/letsencrypt/merge_cert.sh
echo 'cat ${var.var_start}{RENEWED_LINEAGE}/privkey.pem ${var.var_start}{RENEWED_LINEAGE}/fullchain.pem > ${var.var_start}{RENEWED_LINEAGE}/merged.pem' >> /etc/letsencrypt/merge_cert.sh
echo 'chmod 640 ${var.var_start}{RENEWED_LINEAGE}/merged.pem' >> /etc/letsencrypt/merge_cert.sh
chmod 750 /etc/letsencrypt/merge_cert.sh
certbot certonly --standalone --deploy-hook /etc/letsencrypt/merge_cert.sh -n -d vde.${aws_eip.vde.public_ip}.nip.io -d ${aws_eip.vde.public_ip}.nip.io --register-unsafely-without-email --agree-tos
# Based on https://www.snel.com/support/xrdp-with-lets-encrypt-on-ubuntu-18-04/
sed -i 's~^certificate=$~certificate=/etc/letsencrypt/live/vde.${aws_eip.vde.public_ip}.nip.io/fullchain.pem~; s~^key_file=$~key_file=/etc/letsencrypt/live/vde.${aws_eip.vde.public_ip}.nip.io/privkey.pem' /etc/xrdp/xrdp.ini
##############################
# Fix colord remote user issue
##############################
# Derived from http://c-nergy.be/blog/?p=12043
echo "[Allow Colord all Users]
Identity=unix-user:*
Action=org.freedesktop.color-manager.create-device;org.freedesktop.color-manager.create-profile;org.freedesktop.color-manager.delete-device;org.freedesktop.color-manager.delete-profile;org.freedesktop.color-manager.modify-device;org.freedesktop.color-manager.modify-profile
ResultAny=no
ResultInactive=no
ResultActive=yes" > /etc/polkit-1/localauthority/50-local.d/45-allow.colord.pkla
##############################
# Configure Desktop
##############################
if [ '${var.desktopenv}' == 'ubuntu' ]
then 
  echo "#!/bin/bash" > /tmp/desktop_settings
  echo "gsettings set org.gnome.desktop.input-sources sources \"[('xkb', 'gb')]\"" >> /tmp/desktop_settings
  echo "gsettings set org.gnome.desktop.app-folders folder-children \"['Utilities', 'Sundry', 'YaST']\"" >> /tmp/desktop_settings
  echo "gsettings set org.gnome.desktop.privacy report-technical-problems false" >> /tmp/desktop_settings
  echo "gsettings set org.gnome.desktop.screensaver lock-enabled false" >> /tmp/desktop_settings
  echo "gsettings set org.gnome.desktop.session idle-delay 0" >> /tmp/desktop_settings
  echo "echo yes > /home/${var.firstuser}/.config/gnome-initial-setup-done" >> /tmp/desktop_settings
  sudo -H -u ${var.firstuser} dbus-launch --exit-with-session bash /tmp/desktop_settings
  rm -f /tmp/desktop_settings
fi
##########################
# Install VSCode
##########################
wget https://vscode-update.azurewebsites.net/latest/linux-deb-x64/stable -O /tmp/vscode.deb
apt install -y /tmp/vscode.deb
rm /var/crash/*
shutdown -r now

Ubuntu 18.04 has a “first login” wizard, that lets you pre-set up things like, what language will you be using. I bypassed this with the gsettings commands towards the end of the script, and writing the string “yes” to ~/.config/gnome-initial-setup-done.

Also, I wanted to be able to RDP to it. I’m a bit concerned by the use of VNC, especially where RDP is more than capable. It’s just an apt-install away, so… that’s what I do. But, because I’m RDP’ing into this box, I wanted to prevent the RDP session from locking, so I provide two commands to the session: gsettings set org.gnome.desktop.screensaver lock-enabled false which removes the screensaver’s ability to lock the screen, and gsettings set org.gnome.desktop.session idle-delay 0 which stops the screensaver from even starting in the first place.

Now all I need to do is to figure out where I’m going to store my code between boots ;)

So, in summary, I now have a Virtual Machine, which runs Ubuntu 18.04 Desktop, in AWS, with an RDP connection (powered by xRDP), and a disabled screensaver. Job done, I think!

Oh, and if I’m doing it “wrong”, let me know in the comments? :)

Featured image is “Unnatural Love” by “Keith Garner” on Flickr and is released under a CC-BY-SA license.